A Farner water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
A credible water damage inspection in Farner does more than identify where the water is visible. It traces where the water went — through structural assemblies, behind finishes, and into below-grade spaces — and produces a written, defensible assessment you can act on or present to an insurance carrier, a buyer, or a remediation contractor.
Thermal imaging is non-destructive and covers large surface areas quickly — making it the most efficient way to map water migration in a Farner property.
Qualitative assessment says "it looks wet." Quantified readings say "this framing is at 28% moisture content and the dry standard is 10%."
A verbal assessment is an opinion. A written report with instrument readings is documentation.
Both use cases are available in Farner — contact us with your specific situation and our inspector will scope the right assessment.
Here are the specific inspection scenarios and assembly types our Farner team handles.
When a water damage event has just occurred in a Farner property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Farner active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Real estate transactions in Farner frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Farner buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Mold risk assessment in Farner is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade spaces in Farner properties — crawlspaces, basement areas, and below-slab conditions — are among the most common locations for chronic moisture problems to go undetected. Our Farner below-grade inspection covers crawlspace wood framing moisture content readings at joists and beams, vapor barrier condition and coverage, condensation evidence on structural surfaces, and visual assessment for wood rot, fungal growth, and pest damage associated with chronic moisture. Written findings document the below-grade condition for remediation scoping or real estate disclosure.
Our Farner inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in TN.


Call +1-844-499-0972 and describe your situation — active event, pre-purchase, post-remediation, mold concern, or insurance documentation. Our Farner scheduler assigns the appropriate inspection type and confirms your appointment. Most Farner residential inspections are available within 24-48 hours.
Our Farner inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
After the on-site assessment, your Farner inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
The written inspection report — thermal images with annotations, sensor point readings mapped to a floor plan, water category determination, and recommended scope — is delivered within 24-48 hours of the on-site session, formatted for insurance, remediation, or real estate use as appropriate to your situation. We're available to answer adjuster or real estate agent questions about the findings.



"We were purchasing a Farner home where the seller had disclosed a prior basement water event and claimed it was fully remediated. COS Water Damage Restoration's pre-purchase inspection found moisture readings in the wall framing adjacent to the original event area that were significantly above dry standard — indicating incomplete drying. The written report we received gave us specific sensor point readings that we used to negotiate remediation credit from the seller before closing. Without that inspection, we would have closed into a mold problem."
"We used the COS Water Damage Restoration Farner inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"The post-remediation verification inspection is what I most value. After our last Farner property water event, the remediation contractor signed off on completion. We had COS Water Damage Restoration do a verification inspection and found one wall section with framing still above 15% moisture content. That section would have been a mold problem within weeks. The verification inspection caught it before it became our problem."
COS Water Damage Restoration's certified inspection team serves Farner and surrounding communities throughout TN. Call +1-844-499-0972 to schedule your Farner inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Farner inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Farner InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Farner, TN